| View previous topic :: View next topic |
| Author |
Message |
coolscott7
Joined: 26 Jul 2007 Posts: 1 Location: Minneapolis
|
Posted: Wed Oct 24, 2007 2:39 am Post subject: Prophet 600 - some keys dont work - seems to move randomly |
|
|
Hi
I just bought a prophet 600 on ebay. Some of the keys will not produce
sound. But its not always the same keys. The location of the silent
keys varies. Does this mean one or more of my voice chips are out? Ive
had the same problem on one of my prophet 5s, but its very intermittant
and usually clears up. Any ideas? thanks!  |
|
| Back to top |
|
 |
sjones
Joined: 19 Apr 2007 Posts: 233
|
Posted: Wed Oct 24, 2007 7:18 am Post subject: |
|
|
Yes, it sounds like you could have a dead voice. Its probably not a VCO, since you it sounds like you have a completely dead voice, but more than likely a VCF or VCA.
What I would do is turn off OSC A and B and set resonance to 10 and contour to 4 (so the filter is oscillating), press tune and then play a 6 note scale. If you hear a sound on all 6 notes, then you have good filters and amps .. which would mean you'd have two dead VCOs (potentially, or bad components around them). If you hear silence on one of those 6 notes, then you've either got a dead VCA or a dead VCF. |
|
| Back to top |
|
 |
torinkrell
Joined: 06 Apr 2009 Posts: 38 Location: NY-NJ USA
|
Posted: Thu Jan 14, 2010 4:48 am Post subject: |
|
|
Sjones has given excellent advice. However when playing those six notes do make sure to play a chromatic scale so each of the P6's voices has a chance to respond sequentially. Otherwise it will take more than six notes to go through all the voices as at least one voice will be skipped whenever any non-adjacent keys are played up (or down) a musical scale. _________________ Prophet 5 Rev 3.3 w/midi
Prophet 5 Rev 3.1
Roland Jupiter 4
Korg Polysix
Roland 106
Akai AX80
Yamaha CS-5
Octave Cat SRM
Prophet Pro One (x2)
ARP Odyssey Whiteface
Moog Minimoog Model D
Realistic MG-1 (by Moog)
DIY circuit bent toys & more |
|
| Back to top |
|
 |
|